Description
Eutalloy 10112 is a multi-component nickel-base alloy powder blend containing carbide particles. It is a hot process powder designed to be applied and fused using the Eutalloy type thermal spray process. Suitable for use on steels, stainless steels, cast irons and nickel-base alloys that are subject to severe abrasive wear. Coatings are hard and smooth as applied. They resist abrasion, friction, erosion, cavitation, and fretting. It will not peel or scale when exposed to elevated temperatures. The carbide particles are sized to provide optimal resistance to both fine and coarse abrasive particles. Coatings can be put in service as deposited or finished by grinding and polishing.
Applications
Auger Points, Conveyor Chains, Coal Feeder Screws, Pug Mill Knives, Mixer Blades, Fly Ash Chutes, Plow Discs and Harrows, Coal Pulverizers, Sand Slinger Cups, Post Hole Diggers, Debarker Knives, Wear Plates, Drill Bits
Technical Data
Typical Hot Hardness
Up to 1000°F
Typical Micro Hardness
Knoop of Tugnsten Carbide, +1900
Density
10.0 g/cc